
Technical Specification :
D C WELDING | Model | GE W 8000 D |
Maximum Output (Duty Cycle 60%) | 275 Amps. | |
Working Voltage | 20v to 35v | |
Open Circuit Voltage | 70 Volt (Maximum) | |
Current Regulation Amps | 40-275 Amps | |
Rectifying Mode | SCR, Phase Controlled 3-phase, Rectifying Bridge | |
Maximum Electrode diameter | 2.6 mm to 5.0 mm | |
AC GENERATOR | Type | Brush less with Rear Earth magnet Rotor. |
AC. Voltage On Eco Mode | 200 Volts + 10 volts, Single Phase | |
AC. Voltage on Power Mode (No Load) | 250 Volts (No Load) 10 Volts, Single Phase | |
Rated Current | 20.5 Amps | |
NFB | 21 Amps. | |
Rated Power | 4500VA | |
Peak Power | 5000 VA | |
Frequency | 50 to 60 Hz | |
Class of Insulation | F | |
ENGINE | Model | HM192F |
Type | 4-Stroke, OHV, Vertical, Single Cylinder, Direct Injection | |
Maximum Power | 14 HP | |
Bore x Stroke | 92x72 | |
Displacement | 499cc | |
Starting System | Recoil / Self Start | |
Fuel | Standard Diesel | |
Fuel Tank Capacity | 13 Liters | |
Fuel Consumption # Ltr./Hr. | 1.3 Ltr./hr. | |
Continuous Operating Hour | 10 hr. | |
Lube. Oil Capacity | 1650 ml. | |
Lubricating Oil Consumption | 4.3 gm./Hr. | |
Standard Accessories | AC Plug | 1 Pcs. |
Tool Kit | 1 Set | |
Welder Holder With Cable | 1 Set | |
Earthing Clamp with Cable | 1 Set | |
Oil Funnel | 1 No. | |
Owners Manual | 1 No. | |
Battery Terminal | 1 Set | |
Battery Tray & Holding Set | 1 Set | |
Optional Accessories | Sheet Metal Welding Attachment (Helps to adjust low current upto 50 Amps.) | 1 Kit (Additional Cost) |
Costar Wheels | Optional (Wheels & Handle Sets) (Additional Cost) | |
Panel & Other Standard Features | A.C. Circuit Protector | Yes |
Engine Oil Protection | Electronic Oil Alert & Indicator | |
Low Fuel Protection | Yes | |
A.C. Pilot Lamp (R,Y,B) | Yes | |
Fuel Level Gauge | Yes | |
A.C. Output Sockets | 1 No. | |
Packing | Dimension LxWxH (mm) | 710x500x600 mm |
Dry Weight (Kgs.) | 115 Kgs. | |
| Battery Capacity | 120Volt, 35Ah, Size : 190x120x225 (LxWxH) |
Above Specifications are for reference only, Because of continuous improvements and up-gradation by our R&D team. This specifications can change without any prior intimation |